Coatings for Splash Zone are specially engineered heavy-duty protective coatings designed to withstand extremely aggressive environments where structures are exposed to continuous wetting and drying cycles, wave impact, salt spray, and marine atmospheres. These coatings provide superior resistance to corrosion, abrasion, seawater, and chemical exposure. Splash zone coatings are widely used for offshore platforms, marine piles, jetties, bridges, coastal structures, and oil & gas installations.
| Sr. No | Product | Description | DFT (µm) | Colour | Finish | Mixing Ratio | Drying / Curing | Applications |
|---|---|---|---|---|---|---|---|---|
| 1 | SIGMACOVER 850 | Two component, glass flake high-build polyamine adduct cured epoxy coating designed for extreme splash zone environments. | 250–1000 | Light Grey (limited range) | Glossy | 80 : 20 |
Touch dry: 180 min @30°C Overcoating: 2–10 hrs @30°C Full cure: 7–21 days @20°C |
Offshore platforms, jetties, marine piles, splash and tidal zones |
| 2 | SIGMASHIELD 905 | Two component glass flake reinforced, solvent-free, amine-cured epoxy coating for severe marine exposure. | 400–750 | Green | Glossy | 80 : 20 |
Touch dry: 10 hrs @30°C Overcoating: 16 hrs @30°C Full cure: 14 days @30°C |
Splash zones, offshore steel, marine and chemical structures |
| 3 | SIGMASHIELD 880 | Two component high-build polyamine adduct-cured epoxy coating suitable for splash and immersion zones. | 200–1000 | Yellow / Black (limited range) | Glossy | 75 : 25 |
Touch dry: 120 min @30°C Overcoating: 2–6 hrs @30°C Full cure: 7–21 days @20°C |
Offshore platforms, pipelines, marine steel and immersion service |
